Pulsar Digisight Ultra N450 - Zeroing profile; Reticle setup

Zeroing profile 
This main menu option allows you to select between one of the three
profiles. Each profile includes the following:
- Set of distances with zeroing coordinates for each.
- Reticle color
- Reticle type
Various profiles can be used when employing the riflescope on different
rifles and when shooting different cartridges.
џ Hold down the M (9) button to enter the main menu.
џ Select submenu with UP (8) and DOWN (10) buttons.
џ Press briefly the M button to enter the submenu.
џ Select one of the zeroing profiles (shown with letters A; B; C; D; E) with the
UP/DOWN buttons.
џ Confirm you selection with a brief press of the M button.
џ The name of a selected profile is displayed in the status bar.
Graphics brightness 
џ Hold down the M (9) button to enter the main menu.
џ Select option  with UP (10) and DOWN (8) buttons.
џ Press briefly the M (9) button to enter menu item.
џ Press briefly the UP (10) and DOWN (8) buttons to set the desired brightness level
(of the menu and status bar icons) from 1 to 10.
џ Press briefly the M (9) button to confirm.
Reticle setup 
This main menu option allows you to select reticle shape, color and brightness.
Reticle type 
џ Hold down the M (9) button to enter the main menu.
џ Select submenu with UP (8) and DOWN (10) buttons.
џ Press briefly the M button to enter menu item “Reticle type”.
џ Select the desired reticle shape out of the list of reticles with UP/DOWN buttons.
џ The reticle type changes as the cursor goes down the reticle list.
џ Confirm you selection with a brief press of the M button.
Reticle color 
џ Hold down the M (9) button to enter the main menu.
џ Select menu item “Reticle color” with UP (8) and DOWN (10) buttons.
џ Press briefly the M button to confirm.
џ Select the desired reticle color with UP and DOWN buttons:
- black/red (black reticle, red cross)
- white/red (white reticle, red cross)
- black/green (black reticle, green cross)
- white/green (white reticle, green cross)
- red (red reticle)
10
- green (green reticle)
џ Confirm you selection with a brief press of the M button.
Reticle brightness 
џ Hold down the M (9) button to enter the main menu.
џ Select submenu with UP (8) and DOWN (10) buttons.
џ Press briefly the M button the enter the submenu.
џ Set the desired reticle brightness from 0 to 10 with UP and DOWN buttons.
џ Confirm your selection with a brief press of the M button.
Zeroing 
Adding new distance 
џ To zero your riflescope, you need to set a zeroing distance first.
џ You can zero your riflescope at any distance ranging from 1 to 910m
(1 to 955 yards).
џ Hold down the M (9) button to enter the main menu.
џ Select submenu  with UP (8) and DOWN (10) buttons. Press M to confirm.
џ Press briefly the M button the enter submenu “Add new distance”  .
џ Set the values for each digit with the UP/DOWN buttons. Switch between the
digits with a brief press of the M button.
џ Having set the desired distance, hold down the M button to save it.
џ The distance you set first becomes a primary distance – shown with icon
on the right to the distance value.
Note: max. number of zeroing distances is 10 for each profile.
Operating the distances
џ Hold down the M (9) button to enter the main menu.
џ Select submenu with UP (8) and DOWN (10) buttons and enter it with a brief
press of the M button.
џ Enter the submenu “Operating the distances” and enter it with a brief press of the
M button – distances at which zeroing has been done will be shown.
џ The values (for example, +7.0) shown on the right of the distance values, stand for
the number of clicks along the Y axis, at which the reticle position at other
distances differs from the reticle position in the primary distance.
џ To re-zero at any distance, select the desired distance and press briefly the M
button.
џ Zeroing screen, which allows the change of zeroing coordinates, will appear.
Changing the primary distance
џ Select a non-primary distance and enter the submenu for operating the distances
with a brief press of the M button.
џ Select icon  – primary distance.
џ Press briefly the M button.
џ Icon  next to the selected distance confirms the change of primary distance.
Deleting added distance
џ Select the distance you wish to delete and enter the submenu for operating the
distances with a brief press of the M button.
0
0
10
+
150m
www.tulon.ru