EasyManua.ls Logo

Pulsar PTG1121HD - Operation (continued); Controls and Features

Pulsar PTG1121HD
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation (continued)
Controls and Features
RECOIL STARTER
PROTECTIVE SHIELD
FORWARD LEVER
The recoil starter is attached to the right side of the upper
handle. Stand behind the unit and pull the recoil starter
rope to start the unit.
The tiller shield is located in the rear of the tiller and
it is used to shield you from debris being thrown.
The forward lever located on the upper handle controls the
tillers action to start the self-propell and tine rotation.
ON/OFF SWITCH
The On/Off switch is needed to start and stop the tiller.
2
DEPTH REGULATOR
TINES
In hard compacted soil, it helps restrain the tiller's forward
motion. In looser soil, it controls how deeply the tines can dig
into the ground.
Tines are rotating metal blades that dig into the soil.
OIL DIPSTICK
Located on the engine is used to fill oil and measure oil.
This tiller does not come with oil. Oil must be added before
operating it.
Recoil Start
Oil Dipstick
10
Forward
Lever
Depth Regulator
Protective Shield
On/Off
Switch
Tines