Rough-In Valve Model #3002-RIV-PB & #3004-RIV-PB
Please Read The Following Instructions
COMPLETELY Before Beginning!
Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully
and follow recommendations for plumbing and mounting. After reading instructions, if you determine
you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor
complete the installation.
If you encounter any problems during installation
PLEASE VISIT CUSTOMER SUPPORT AT
WWW.PULSESHOWERSPAS.COM
Before returning your product to the store
You Will Need The Following Tools
Soft pencil or felt pen to mark tile
4mm allen wrench
Safety glasses
Phillips screwdriver
Reciprocating saw w/metal cutting blade (Sawzall®)
Channel locks or adjustable wrench
Drill (Preferably cordless)
Plumber's Tape
Usage
Tru-Temp Pressure Balance Mixing Valve
This valve is equipped with a cUPC® Tru-Temp pressure balance mixing cartridge to adjust
water fl ow and temperature. The valve automatically adjusts to changes in water pressure (i.e.
someone fl ushes a toilet), keeping your temperature constant preventing accidental scalding.
To turn on the water simply raise the handle until the desired fl ow rate is achieved. Rotate
handle right to decrease temperature and rotate left to increase temperature.
LED display will display water temperature.
Care and Maintenance
Always blot dry any water from the surface of your mixing valve. To protect your mixing valve
from hard water stains and mineral deposits, use an auto spray wax periodically and wipe dry
after each use. Allowing water to evaporate on the surface can lead to a buildup of mineral
deposits. Cleaning with a damp, non-abrasive sponge and drying with a clean soft cloth should
help keep your mixing valve looking beautiful.
REMEMBER
Never use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your valve in pristine condition,
DRY AFTER EACH USE!
To Next Page
Loading...
Need help?
General