Pumpables Genie Plus - Page 14

Attach the silicone duck valve to the
underside of the connector
Attach the breastshield to the connector.
Not sure which size you need? Use our
measurement tool at:
pumpables.co/measure
Screw the milk collection bottle into
the connector
Assemble the backflow protector by
attaching the membrane to the bottom
piece and then attach the top piece
Now you can connect the tubing to
the top piece of the backflow
protector and to the Genie Plus.
Don’t forget to cover the unused
airport if you’re single pumping!
Fit the stem of the bottom piece of
the backflow protector into the
connector.
1
1
0
4
8:08