www.pure-acoustics.com/
FM Radio with Automatic Scanning
Turn on the speaker with the on / off switch.
Press the MODE button on the panel until you reach FM mode.
Click on the buttons Pause, 3 and 5 to scan the radio stations in your region between 87.5-108.0
Mhz frequencies.
Operating the disco lights
The disco lights will work automatically when the speaker is turned on.
To turn off disco lights, press and hold button 4.
To activate the disco lights again, press and hold button 4.
Charging Indicator Icon
While charging, the red LED light turns on – when the device is turned off or pink light
when the device is in use - showing that the product is in charge.
When used first, the speaker must be charged for up to 12 hours or until the indicator icon shows
full mode.
When the indicator icon starts blinking, the 5V Micro USB cable must be connected to a USB
charger. (not included)
The speaker can be turned on while charging.
Technical Specifications:
Power: 8W
Frequency Response: 100Hz-20 KHz +/- 3dB
Impedance: 2Ω
Power Supply and Voltage: 5V Micro USB
Dimensions: 150mm x 100mm x 224mm
Included in package:
Bluetooth Speaker: 1
Micro USB charging cable: 1
English User Manual: 1
To Previous Page
Loading...
Need help?
General
