EasyManua.ls Logo

Pure Clean PUCWM33 - Drainage and Water Inlet; Upper Drainage Method; Water Inlet Procedure; Power Line Connection;Disconnection

Pure Clean PUCWM33
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.PyleUSA.com
4
2. Upper drainage: In order to drain o the water fast, you can choose manual
upper drainage. Shut o the electricity rst and disconnect the product and
the power. Grab the handle and the hole of the pedestal, lean the upper outlet
downward, and then drain o the water.
Because you may not drain o the water in a short time by lower drainage, we
recommend you to choose upper drainage after lower drainage. Considering
the mini folding washing machine is small,so the drainage pipe diameter is
small, it's normal for draining slowly, please wait patiently.
Water Inlet
Please pour clean water into the tub of washing machine directly and the water
level can not exceed the highest water level"H".
Power Line Connection
Power electric voltage and rate must be consistent with the data plate on the
machine. Please follow below steps when removing washing machine
connection:
1. Disconnect the power and socket
2. Drain o water in the tub
3. Wipe the washing machine and keep it clean
Learn about the folding washing machine
1. Bucket Lid
2. Barrel frame
3. Handle
4. Folding
bucket
5. Drain
6. Knob
7. Base
8. Bucket
bottom
9. Pulsator