Need help?Do you have a question about the Puricom Europe DENVER and is the answer not in the manual?
General| Brand | Puricom Europe |
|---|---|
| Model | DENVER |
| Category | Water Dispenser |
| Language | English |
Alerts to potential hazards, emphasizing user and others' safety.
Guidance on pre-installation checks, manual reading, and material gathering.
Defines water hardness, its causes, and associated problems in water systems.
Explains the ionic exchange process used by the softener to remove hardness.
Details the system's regeneration process, including backwashing, brine aspiration, and rinsing.
Discusses how resin volume and regeneration grade affect the softener's capacity.
Specifies recommended contact times and flow rates for efficient softening.
Explains factors causing reduced softening efficiency and potential hardness leaks.
Describes how to adjust the residual hardness regulator for optimal water output.
Addresses the increase in sodium concentration in treated water and its implications.
Lists essential conditions for proper system functioning, including pressure, temperature, and water quality.
Key points and precautions for installing the water softener in a suitable location.
Outlines periodic sanitization and maintenance tasks for the system.
Lists all necessary tools and materials required for the installation process.
Detailed, sequential instructions for physically installing the water softener system.
Explains the features, display, and operation of the electronic timer.
Guide to programming the system capacity, regeneration type, and other parameters.
Step-by-step procedure for the initial hydraulic connection and startup of the softener.
Instructions for adjusting the residual hardness regulator for desired water output.
Method for testing the treated water hardness using a chemical test kit.
Guidance on checking salt levels, refilling the tank, and resolving salt bridges.
Procedure for performing the annual sanitization of the water softener system.
Annual cleaning process to remove internal incrustations and metals from the system.
To Next Page