Steps to program your radios
System: Windows 10
1. This is the guide for programming Pxton PX-888S walkie-talkies with
Windows 10. The programming cable enclosed in the package uses
CH340
chip which is fully compatible with Windows 10 and no driver is
needed. For older Windows system versions like Windows XP/7/8/8.1,
please install the drivers for
CH340
chip manually (included in the folder Fig.1).
Fig.1
2. Once the programming cable is ready, turn on your radio to any
channel, plug the 2-pin end into the earpiece jack of the radio (BF-480
Series share the earpiece jack for data transfer.), the other USB end goes
to your computer USB port.
Tool download addr : https://dwz.cn/QykdpEcO
To Next Page
Need help?
General
