Need help?Do you have a question about the PYLE Audio PDPC8T and is the answer not in the manual?
General| Woofer Size | 8 inches |
|---|---|
| Power Handling | 250 Watts |
| Frequency Response | 50Hz-20kHz |
| Impedance | 8 Ohms |
| Sensitivity | 90 dB |
| Transformer Taps | 70V/100V |
| Speaker Type | 2-Way |
| Tweeter Size | 1 inch |
| Color | White |
| Material | ABS |
| Weight | 4.4 lbs |
| Type | Ceiling Speaker |
Cut an 8-inch diameter hole for speaker placement and ensure sufficient wire length.
Attach the speaker wire to the terminals on the back of the speaker unit.
Carefully place the speaker into the pre-cut hole in the wall or ceiling.
Use the integrated screws to firmly mount the speaker in its final position.
To Next Page