Need help?Do you have a question about the Pyle Pro PCO800 and is the answer not in the manual?
General| Frequency | 50/60Hz |
|---|---|
| Max Load | 15A |
| Power Capacity | 1800 Watts |
| Number of Outlets | 8 |
| Front Outlets | 1 |
| Construction | Metal |
| Rack Mountable | Yes |
| Weight | 5.5 lbs |
| Output Voltage | 120V AC |
| Protection | Surge, Spike |
| Indicators | LED |
| Circuit Breaker | 15 Amp |
| Dimensions | 19 x 1.75 x 3.5 inches |
| Type | AC Power Conditioner |
Outlet switch with built-in LED that activates protection and filtration to back panel outlets.
Extendable lights for rack illumination that swivel and can be angled for desired light direction.
Switch that activates the rack illumination lights.
Control used to adjust the brightness of the rack illumination lights.
Numeric display showing the incoming AC line voltage.
LEDs indicating normal, high, or low voltage conditions.
Heavy-duty 14-gauge power cord for connecting to AC mains.
Resettable 15-amp thermal circuit breaker for overload protection.
Eight EMI/RFI filtered, spike/surge protected and switched rear panel outlets.
Instructions for installing the unit in a rack and connecting power and equipment.
Guide to operating the rack lights, dimmer, and understanding the voltmeter.
Information on the maximum load capacity and how the circuit breaker functions.
To Next Page