Pyle Pro PDWM94 User Manual

WIRELESSMICROPHONEANDRECEIVER
OPERATINGINSTRUCTIONS
HOWDOYOUOPERATEIT?
ATTENTIONS:
SPECIFICATIONS:
ACCESSORIES:
Itisveryhappythatyouhavethisprofessionalwirelessmicrophone
ofgoodqualitywhichwillbringyouintoaworldwhereyoucansing
happilyandfreelytoyourheart'scontentsothatyouenjoyit
admiringly
Screwoffthehousing,insertabattery(sizeAA)withthecorrectpolarityand
screwonthehousingbeforeinsertingthetelescopicantennaandsetthe
switchtotheONposition.Thepilotlampisonatthistime.Insertanother
battery(sizeAAA)intothereceiverwiththecorrectpolarity.Settheswitch
ofreceivertoONposition,thenthepilotlampisonthatindicateagood
condition.Afterthat,plugthereceiverintotheinputsocketformicrophoneof
amplifieranditisreadyforoperation.
Whenyouneedtemporarystopduringsingingandyoudon'twantthe
microphonetopickupanyothersound,youmaysettheswitchtothemiddle
(MIC)position.Now,thelampisstillonbutyourmicrophonedoesn'ttransmit
anysound.
Useitaswiredmicrophone:
Takeoutthebatteryfromthemicrophone,connectthewiretothe
microphoneandsettheswitchtoMICposition.
Microphonesensitivity
Directivity
Frequencyresponse
Outputimpedance
Operatingvoltage
Effectivedistance
-72dB
Undirectional
100to10,000Hz
600ohm
1.5VDC
15to30m
1Receiver1Wirelessantenna1Wireforwiredmicrophone
Ifacousticqualityandvolumeareabnormalorreceivingdistanceisshorted,
thebatteriesinwirelessmicrophoneandreceivershouldbereplaced,If
thereafterstillnotinnormaloperation,youcancarefullytrimthefrequencyof
receiverwithascrewdrivertobecomenormaloperation.
Ifyourmicrophoneisn'tusedforalongperiod,thebatteryshouldbetaken
outtoavoiditsdeteriorationandthedamageofcomponents.
Iftwowirelessmicrophonesareusedatthesametime,youmustusethem
1.
2.
3.
1.
2.
3.
PDWM94

Pyle Pro PDWM94 Specifications

Microphone Specifications

microphone sensitivity	72 dB
directivity	Undirectional
frequency response	100 to 10, 000 Hz

Power and Connectivity

operating voltage	1.5 V DC
output impedance	600 ohm
effective distance	15 to 30 m

Summary

How to Operate the Wireless Microphone

Initial Setup and Power On

Insert AA battery into microphone, set switch ON. Insert AAA battery into receiver, set switch ON. Plug receiver into amplifier.

Temporary Mute Functionality

Set the microphone switch to the middle (MIC) position to stop sound transmission while the pilot lamp remains on.

Using as a Wired Microphone

Remove microphone battery, connect the wire, and set the switch to the MIC position for wired operation.

Important Attentions and Precautions

Troubleshooting Performance Issues

Replace batteries for abnormal audio or short range. Trim receiver frequency with a screwdriver if issues persist.

Battery Maintenance for Long Periods

Remove microphone batteries during prolonged non-use to prevent deterioration and component damage.

Using Multiple Wireless Microphones

Specific instructions apply when operating two wireless microphones simultaneously.