Need help?Do you have a question about the Pyle Pro PT-659DU and is the answer not in the manual?
Audio Specifications| Type | Stereo double cassette deck |
|---|---|
| Track System | 4-track 2-channel |
| Tape speed | 4.8 cm/sec |
| Frequency Response (Chrome tape, -20dB) | 40-15000Hz (±3dB) |
| Frequency Response (Normal tape, -20dB) | 40-14000Hz (±3dB) |
| Frequency Response (Chrome tape, 0dB) | 40-8000Hz (±3dB) |
| Frequency Response (Normal tape, 0dB) | 40-8000Hz (±3dB) |
| S/N ratio | 58dB |
| Wow and flutter | <0.2% (DIN45500) |
| Crosstalk | 40dB (1kHz) |
| Harmonic distortion | less than 1% (at 1 kHz, OVU 3rd H.D. normal tape) |
| Channel separation | 40dB (1kHz) |
Head and Motor Specifications| Head (Deck A) | Playback |
|---|---|
| Head (Deck B) | Recording/playback, 2-gap ferrite head for erasure |
| Motor | DC servo motor x 2 |
Power| Power requirement | AC 110V ~ 60Hz |
|---|---|
| Power Consumption | 6W Maximum |
Ports & Interfaces| Input terminals | Line In x 2, Min. input level: 600mV (0dB), Input impedance: 50k |
|---|---|
| Output terminals | Line Out x 2, Output level: 600mV (0dB), Output impedance: 5k |
Weight and Dimensions| Dimensions | 420mm x 135mm x 215mm (W x H x D) / 16.54” x 5.32” x 8.46” inches |
|---|---|
| Weight | 4kg (8.5lbs) |
Guidelines for safely connecting and disconnecting the power plug, including use with wet hands.
Warning against removing covers to prevent electric shock and damage.
Instructions for proper ventilation and avoiding placement near heat sources or water.
Warning about invisible laser radiation and avoiding direct beam exposure.
Steps for recording audio from external sources onto cassette tapes.
Procedure for copying tapes from deck A to deck B, including speed selection.
To Next Page
