Pyle Pro PWMA-230 - Operating Instructions; Confirm Power and Battery Status; Basic Operation Guide

1. Confirm the power
© AC Power Before operation, please confirm the voltage is same as
the specified one marked on the label. If not. the unit will be damaged.
1 . 2 ) Built-in Rechargeable Battery: Yon needn't plug-in the AC power
when the voltage for rechargeable battery is enough but use the battery
directly.
© When the Low Voltage Indicator comes on yellow, it indicates the ba¬
ttery voltage is not enough, please charge it in time.
@ When the Low Voltage Indicator comes out. it indicates the voltage
is standard now.
(D If the unit is not used for a long time, please charge the rechargeable
battery every 2 months, 8-10 hours for each time.
2. Operation Instructions:
® Plug the power cable into the socket and connect it with this amplifier
system.
(2) Switch on the amplifier, the Power Indicator comes on red.
@ Put a 9V battery into handheld microphone
push the Power Switch to middle, the Power Indicator will flash once,
RF Indicator comes on green, the speakers are quiet.
© Push the Power Switch of handheld microphone
to ON position, your sound can be heard from amplifier when
speaking. Adjust the Volume Control/Echo Control/Treble Control/
Bass Control to proper position to avoid feedback.
(S) If the Power Indicator of handheld microphone
' comes on at all times, it indicates the battery lack of power,
please replace the battery.
© Connect relative cable of guitar with Guitar Input Jack on this system,
you can play wonderful music.