AUX IN operation
An external AV system can use the car AV system as monitor and amplifier.
1. Use an AV cable to make the car AV system and the external AV system connected
through the AUX IN jack on control panel of the car AV system and the AV Out jacks
of the external AV system.
2. Play the external AV system, then use MODE button or the Source Menu to enter
AUX IN mode for the car AV system. By now, the program played by the external
AV system can be output through the monitor of the car AV system and the
speakers connected to the car AV system.
* The icons on the AUX interface descript as follows:
- and + icons = VOL- and VOL+ buttons = VOL knob
icon = MUTE button
EQ icon = short pressing EQ/LOUD button
TA icon : To switch TA mode on or off.
AF icon : To switch AF mode on or off.
icon : press it to pop up BT PHONE interface(after pairing and connecting a
mobile phone with BT function)
icon: To enter source menu.
3. In AUX IN mode, you can use SEL, +, -, VOL, MUTE, EQ , SW and LOUD buttons
or icons to adjust audio and video.
Ground
Right
Left
Ground
Right
Left
To Next Page
Loading...
Need help?
General