• Turn off the machine and keep the right water level.
Restart the machine.
The Led display screen reads error code: E02.
• The digital thermostat is broken. Contact the customer support.
CLEANING
With frequent use, descaling should be done every month or
more often in regions with hard water.
1: Put the appliance in a pot and ll the pot with water to the "Max"
level indicated on the appliance.
2: Set the appliance temperature to 70°C or 158°F.
3: Add 5g of citric acid powder (Food grade) per liter of water used.
4: Allow the water to circulate for 20 minutes when 70°C or 158°F is
reached.
5: Turn off and unplug the appliance.
6: When the appliance is cooled down, rinse the bottom using cold
water and dry before storage.
www.NutrichefKitchen.com
6
To Next Page
Loading...