ww w.PyleUSA.com
4
FRONT & BACK PANEL FEATURES:
1. POWER SWITCH: Outlet switch activates protection and ltration to all back
panel outlets. To turn the unit ON or OFF, press the upper or lower portion of
this button.
2. POWER CORD: Heavy duty 14-gauge power cord for connection to the
AC Power Mains (115V/60Hz).
3. CIRCUIT BREAKER: Resettable 15 Amp thermal circuit breaker.
4. 8 REAR PANEL OUTLETS: EMI/RFI Filtered, spike/surge protected and switched.
INSTALLATION AND OPERATION
1. The Power Conditioners are the perfect accessories for any rack mount system.
Install in the top slot of a standard 19-inch rack, and the 8 switched AC outlets
on the rear panel will provide full safety protection to al your rack equipment.
These conditioners protect your delicate electronic equipment by combining a
high voltage varistor surge and transient suppressor with an RFI/EMI
interference lter. The lter helps prevent noise from uorescent lights, motors,
and similar sources of “electronic pollution” from contaminating the AC feed to
your senitive video, audio, vtr or computer circuits.
2. Plug Power Cord (2) into a standard grounded 115V outlet.
3. Plug sensitive electronic equipment into the 8 Rear Panel Outlets (4)
4. Turn Outlet Power Switch (1) to “ON” position. Lit LED indicates conditioned
power to the connected equipment.
1
2 3 4
To Next Page
Loading...
Need help?
General
