www.PyleUSA.com
6
How to check the cone t on a Resonator/Resophonic guitar
1. Please open the top cap of the
PGA500BR resonator guitars,
and ensure the following part is
showed up we usually tighten
the screw in the center.
2. Guaranting that bracing and
bottom cap is linked together,
no any buzzing or other noise.
3. If you nd some bracing is not
linked very tight, please kindly
use a small wood bar to ll the
gap. The bottom cap could be
moved a little, this is normal.
When playing the guitar,
tighten and adjust the guitar
string and tailpiece very well.
To Next Page
Loading...
