Features/Ports and Buttons:
1. OUTPUT—HDMI output, pass through display HDMI or YPbPr video.
2. INPUT—HDMI input.
3. YPBPR INPUT—YPbPr component input.
4. PWR—DC 5V | 110/220V
5. USB HOST—For plug USB flash drive or USB HDD for saving record files.
6. LINE IN—Work with YPbPr input only.
7. MIC—To connect a microphone and record voice comments while playing a game (PHDRCB26
only work with component input. PHDRCB26 MIC work both for component and HDMI input)
8. LINE OUT—Audio output.
9. LED indicator—Color while be green while in standby; red while recording.
10. REC button—Press to record/stop.
How to play:
1. Connect power with DC adaptor
2. With component cable connect
to PS3 or other source
3. Use HDMI cable to connect
Xbox or other sources.
4. With HDMI cable connect to
monitor
5. The “LINE OUT” is for connect
to speaker or earphone.
6. You can connect your
microphone to record your
comment when play game.
7. Plug an USB disk on.
Most important: Use “safety remove” option to remove your USB flash or HDD after format
from computer, DO NOT just plug out without click “safety remove” option, otherwise you will cause
problem during recording.
8. If you want record from computer (game or video) with DVI port, you can use a DVI to HDMI cable
to connect (Note: Only can record video), like following picture:
To Next Page
Loading...