13. Non-use Periods:
The power cord of
the appliance should
be unplugged from
the outlet when the
appliance is to be left
unused for a long
period of time.
14. Object and Liquid Entry:
Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure
through openings.
15. Carts and Stands: If the appliance is
used with a cart or stand, the cart or
stand should be a type recommended
by the manufacturer. An appliance and
cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces
cause the appliance and cart combination to
overturn.
16. Mounting: The appliance should be mounted
only as recommended by the manufacturer.
17. Damage Requiring Service: The appliance should
be serviced by qualied service personnel when:
A. The power-supply cord or plug has been
damaged.
B. Objects have fallen into, or liquid has been
spilled into the appliance enclosure.
C. The appliance has been exposed to rain.
D. The appliance has been dropped, or the
enclosure damaged.
E. The appliance does not appear to operate
normally or exhibits a marked change in
performance.
18. Servicing: The user should not attempt to
service the appliance beyond that described in
the user’s operating instructions. All other servicing
should be referred to qualied personnel.
19. Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of re or
electric shock.
20. Replacement Parts: When replacement parts
are required, be sure the service technician has
used replacement parts specied by the manufac-
turer or have the same characteristics as the
original part. Unauthorized substitutions may
result in re, electric shock or other hazards.
21. Safety Check: Upon completion of any service
or repairs to this appliance, ask the service techni-
cian to perform safety checks to determine that
the appliance is in proper operating condition.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
This product can expose you to a chemical or group of checmicals, which
may include ”Nickel Carbonate” which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.
FEATURES AND CONTROLS
Features and Technical Specs:
• Removes AC Hum Noise
• Breaks Ground Loops Safely
• Maintains Highest Sonic Quality
• High-Performance Ultra-Compact Design
• High-Quality Components and Exceptionally
Rugged Construction
• (2) 1/4-lnch TRS Inputs and Outputs for 2-Mono or
1 Stereo Signal
• Automatically Converts Unbalanced to Balanced
SignalWithout Any SignalLoss
• Dimensions (W x D x H):4.09" x 2.28" x 1.38"
Almost all 60Hz AC hum is caused by ground loops that act like radio antennae (loop antenna). The Hum
Eliminator completely eliminates this by breaking the ground loop, making it impossible for the signal lines to
pick up the AC hum and noise in the rst place. Unbalanced lines are more susceptible to picking up electrical
noise and RF interference than balanced lines - the longer the unbalanced cable, the greater the chance of a
problem. Using this device to connect two pieces of equipment is one of the most cost-eective ways to
convert between unbalanced signals and true balanced signals. Automatically Translates Signal Voltages to
Match Dierence in Ground Potentials.
www.PyleUSA.com
To Previous Page
Loading...
Need help?
General
