Need help?Do you have a question about the Pyle PLCM3550WIR and is the answer not in the manual?
General| Category | Automobile Electronics |
|---|---|
| Model | PLCM3550WIR |
| Brand | Pyle |
| Display | LCD |
| Night Vision | Yes |
| Wireless Transmission | Yes |
| Power Supply | DC 12V |
| Voltage | 12V |
| Type | Rear View Camera |
| Screen Size | 3.5 inches |
| Waterproof Rating | IP67 |
| Viewing Angle | 170 degrees |
| Wireless Range | 100 feet |
| Dimensions | 4.5 x 4.5 x 3 inches |
| Video System | NTSC |
The backup camera is an aid; drivers must remain attentive and check surroundings actively.
Monitor image may differ; wide-angle lens affects distance. View area is limited.
Ensure proper function, mounting, trunk operation, and keep camera clean and unobstructed.
Follow traffic laws and be aware the system does not eliminate blind spots.
Guidelines for installing the system, potential risks, and the importance of professional installation.
Unit operates on 12V/24V DC NEGATIVE GROUND systems; check vehicle compatibility.
Connect transmitter to camera and power source (reverse light), receiver is in the monitor.
Detailed steps for connecting the camera to the wireless module and mounting the camera.
Instructions on mounting the display monitor using a suction cup and powering it via cigarette plug.
Tips on camera placement, cable management, and how to test the installed camera and monitor system.
Explanation of monitor buttons: power, video switch, menu, and adjustments.
Diagram showing connections between camera, transmitter, monitor, and vehicle power.
To Next Page
