EasyManua.ls Logo

Pyle PSBWP9BK - Hands-Free Calling; Reset Functionality; Charging Instructions; Safety and Warnings

Pyle PSBWP9BK
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.PyleUSA.com
5
Hands-free call:
• Under Wireless BT connection status, if there is an incoming call, user can press
Play/Pause button to accept the call or press and hold Play/Pause button to
reject the call.
• During the call, user can press and hold Play/Pause button to switch to talking
on the phone.
• Press Play/Pause button or operate on mobile phone to end the call.
Reset Functionality:
If the speaker does not turn o or respond, user can short-press the RESET jack
with a small round pin to reset the speaker.
More Remarks:
• Default volume is at 50% status of max volume.
• Play time may vary depending on volume level and music style.
How to charge:
• The charger is not included in the package, please charge the speaker via a
standard 5V/1-2A charger or via a PC.
• Charge time should be 6-8 hours. After full charging, the 4 LEDs keep lighting.
• When battery voltage is low, the speaker will prompt for recharging.
• The unit does not have power bank function, it is forbidden to charge other
device via this unit or to connect other device via the USB port.
IMPORTANT:
When playing music during charging, please put the volume to middle, because
for some music with heavy bass, the charger may not be able to aord the high
current temporarily under the maximum volume.
Warning:
• Don’t use/store this speaker in extreme temperatures.
• Please store it in cool and dry area, keep away from anything that generates
heat, such as radiators, stoves, etc.
• In order to have hearing protection and an extended speaker life, avoid listening
to songs on maximum volume.
• When cleaning this speaker, use a soft dry cloth. For more sever stains, please
dampen the cloth with water only. Anything else has the chance of dissolving
the paint or damaging the plastic.