EasyManuals Logo

Pyle PWMA1050BT User Manual

Pyle PWMA1050BT
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
1. Confirm the power
@ AC Power: Before operation, please confirm the voltage is
same as the specified one marked on the label. If not, the unit
will be damaged.
@ Built-in Rechargeable Battery: You needn't plug-in the AC
power when the voltage for rechargeable battery is enough
but use the battery directly.
O When the Low Voltage Indicator comes yellow, it indicates
the battery voltage is not enough, please charge it in time.
@ When the Low Voltage Indicator comes out, it indicates the
voltage is standard now.
(b) Ifthe unit is not used for a long time, please charge the rec-
hargeable battery every 2 months, 8-10 hours for each time.
2. Operation Instructions:
@ Plug the power cable into the socket and connect it with this
amplifier system.
@ Switch on the amplifier, the Power Indicator comes red.
O During charging, RECHARGE indicator comes red, when
the indicator flashing, that means battery is amost full while
it is ready all indicators will off.
@ During charging, you can play music at the same time, then
RECHARGE indicator will flashing with the current
comsuption indicating the speed of charge. Charge time is in
direct proportion to the volume of music. When the battery is
full, RECHARGE indicator will stop flashing and then off.
O Put two AA 1.5V battery into handheld microphone (bodypack
transmitter), push the Power Switch to middle, the Power
Indicator will flash once, RF Indicator comes on green, the
speakers are quiet.

Other manuals for Pyle PWMA1050BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pyle PWMA1050BT and is the answer not in the manual?

Pyle PWMA1050BT Specifications

General IconGeneral
BrandPyle
ModelPWMA1050BT
CategorySpeaker System
LanguageEnglish

Related product manuals