Pyle PWMA230BT User Manual

5 6
INSTRUCTIONS
3. Wired Microphone:
Two way wired microphone input jacks are supplied for two
people us simultaneously.
Plug Wired microphones into the jacks separately.
Adjust Echo Control to get better sound.
Adjust the volume of each microphone to make sure the
sound is satisfactory.
①
②
③
④
⑥
⑦
⑧
Push the Power Switch of handheld microphone(bodypack
transmitter) to ON position, your sound can be heard from
amplifier when speaking. Adjust the Volume Control/Echo
Control/Treble Control/Bass Control to proper position to
avoid feedback.
If the Power Indicator of microphone (bodypack transmitter)
comes on at all times, it indicates the battery lack of power,
please replace the battery.
Connect relative cable of guitar with Guitar Input Jack on this
system, you can play wonderful music.
⑤
When you turn on the unit, be sure ECHO control set to
minimality, or there will cause sound distortion
6
INSTRUCTIONS
You can connect your Bluetooth phone or other device to the PA
speaker.
1. Turn on the unit.
2.Press the ON/OFF switch on front panel, bluetooth will on.
3.When the indicator light is on it means the bluetooth in ON.
4. Use your Bluetooth phone or other device to search for the PA speaker.
It will displayed as .
7.Play music on your phone or device, sound will come from the
speaker through the BLUETOOTH wireless connection.
8.You can use the VOLUME/BASS/TREBLE to adjust the sound level for
BLUETOOTH, also you can adjust the Bluetooth music sound through
your own phone or other device.
NOTES: If there is no sound through the PA speaker during Bluetooth,
Check the volume controller both on the unit and on your phone or
other device.
PYLE SPEAKER
5.Connnect your devices with PYLE SPEAKER,it will pair with unit
automatically.
6.You do not need code and get connected with unit.
4. BLUETOOTH playback
718.535.1800 718.236.2400(fax)
1600 63rd Street, Brooklyn NY 11204

Pyle PWMA230BT Specifications

General

Amplifier	Built-in
Driver diameter	203 mm
Number of speakers	1
Audio output channels	- channels
Subwoofer driver diameter (imperial)	8 \
Sensitivity	94 dB
Frequency range	35 - 20000 Hz
RMS rated power	200 W
Peak Music Power Output (PMPO)	400 W
Total Harmonic Distortion (THD)	1 %
AC (power) in	Yes
Connectivity technology	Wired & Wireless
Product type	-
Product color	Black
Volume control	Rotary
Recommended usage	Universal
Power source type	AC, Battery
Battery life (max)	10 h
AC adapter input voltage	110 - 220 V
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	373.3 mm
Width	269.24 mm
Height	284.5 mm
Weight	- g