Need help?Do you have a question about the Pyramid PR3000 and is the answer not in the manual?
Explains the SEA-3000's purpose for bi-amp, tri-amp, or multi-amp home stereo systems with sophisticated settings.
Diagram illustrating the front panel controls of the SEA-3000 electronic crossover network.
Diagram showing rear panel connections including input, output, and power terminals for the unit.
Describes the power on/off switch and the LED indicator for unit status.
Details the switches for setting specific crossover frequencies for low, mid, and high frequency bands.
Explains the controls for adjusting the output volume levels for low, mid, and high frequency channels.
Details the RCA input jack, various output connectors, and the GND screw for noise reduction.
Explains the AC source selector for voltage, the fuse holder, and the AC power cord connection.
Illustrates filter selector settings, frequency division, and output connections for a 3-way system.
Provides diagrams for two different 2-way system setups, including filter and output connections.
Illustrates a typical connection diagram for the SEA-3000 with various audio sources and amplifiers.
Lists key technical specifications including impedance, crossover frequencies, filter slope, distortion, and S/N ratio.
Details power requirements, consumption, and physical dimensions of the SEA-3000 unit.
To Next Page
General
