V2 GSM Installation Manual
Pyronix Ltd Page: 16
5.7 DEFAULT CALL TIMEOUT [171]
See IMMEDIATE NUMBER OF REDIALS [165]
Press the [ or ] keys to scroll to
‘DEFAULT CALL TIMEOUT’ or enter
‘171’.
Press B or T to choose between
the call timeout or select the number:
0 = 30 seconds = Default
1 = 60 seconds, 2 = 120 seconds
3 = 180 seconds
Press t
5.8 CALLING STRATEGY [172]
SEQUENTIAL = The V2 GSM will dial in sequence all numbers programmed for as many
times as number of redials have been programmed for this number.
REPEAT CALLS = The V2 will call the same telephone number as many times as the
number of redials programmed for this phone number before dialling the next number.
Press the [ or ] keys to scroll to
‘CALLING STRATEGY’ or enter
‘172’.
Press B or T to choose between
Sequential or Repeat Calls or select
the number:
0 = Sequential = Default
1 = Repeat calls
Press t
5.9 DIAL ALL NUMBERS [173]
If this function is enabled, all numbers programmed on each individual input will be dialled.
Press the [ or ] keys to scroll to
‘DIAL ALL NUMBERS’ or enter ‘173’.
Press B or T to choose between
Yes or No or select the number:
0 = No = Default
1 = Yes
Press t
To Next Page
Loading...