V2 GSM Installation Manual
Pyronix Ltd Page: 26
5.30 VIEW EVENT LOG [604]
All events that occur are recorded in the event log.
The V2 GSM display will show all information in order, starting at the most recent event.
The above display shows the following:
001 = Event number (up to 256, time and date)
00:32 = Time
010110 = Date (DD:MM:YY)
Press the [ or ] keys to scroll to
‘VIEW EVENT LOG’ or enter ‘604’.
Press B or T to scroll back and
forth through the log. Press the ]
key to jump to the last event.
Press t to exit.
5.31 ERASE EVENT LOG [605]
Press the [ or ] keys to scroll to
‘ERASE EVENT LOG’ or enter ‘605’.
Press B or T to select ‘Yes’ and
the press t to erase all the log.
5.32 CHANGE ENGINEER CODE [606]
Press the [ or ] keys to scroll to
‘CHANGE ENGINEER CODE’ or
enter ‘606’.
Enter the new engineer code and
press t.
Default Engineer Code = 9999
To Next Page
Loading...