To Next Page

To Previous Page

1999 Directed Electronics, Inc.

■ Full trigger response 30 or 60 seconds: This determines how

long the full triggered sequence lasts. Some states have laws

regulating how long a security system can sound before it is

considered a nuisance. If your installer is programming the secu-

rity system with the DEI Bitwriter or a personal computer and

the TechSoft Programmer, the full triggered response can be

programmed for any duration ranging from 1 to 180 seconds.

■ Nuisance Prevention

Circuitry on or off: Please refer to the

NPC

™

section of this manual for a complete explanation of

how NPC

™

operates. If NPC is programmed off, the security

system will respond to inputs from any sensor indefinitely.

NOTE: Because many states have laws regulating security systems, pro-

gramming NPC off may cause your system to violate state laws.

■ Progressive door trigger on or off: When the system is armed

and a door is opened, the system responds with ten chirps

prior to beginning the full triggered sequence. If an instant

trigger is desired, the progressive door trigger can be pro-

grammed off.

■ Valet pulse count: The number of presses of the Valet

switch

required to disarm the security system or the VRS

system can

be programmed from 1-5 presses. The default setting is one

press.

■ Siren tones and chirp volume: The output of the Revenger

Soft Chirp

siren consists of six different tones in sequence.

Any of these tones can be eliminated by your dealer, result-

ing in a unique, easily identifiable siren sound. The siren

chirps can be either full volume or 6 decibels quieter than

the full alarm blast.

Python 650ESP User Manual

Questions and Answers: