TO FILL YOUR AQUARIUM
Follow the instructions below carefully to refill your
aquarium or pond.
1. With the gravel tube
D
removed from the
aquarium or pond, make sure the switch
C
is
turned to the CLOSED position (See Fig. 2).
2. Return to your sink and adjust the water
temperature flowing from the pump
B
to match
that of your aquarium or pond. A small aquarium
thermometer can be used for complete
accuracy.
3. Push the bottom of the pump
B
up gently and
twist 1/4 turn to the right to the FILL position noted
on the pump (See Fig. 6).
4. Return to your tank and hold the gravel tube
D
over the tank and slowly turn the switch
C
to the
OPEN position (See Fig. 4). DO NOT LEAVE THE
SWITCH IN THE CLOSED POSITION FOR MORE THAN
THE TIME IT TAKES FOR YOU TO GET TO YOUR
AQUARIUM.
5. Refill your aquarium. During the refilling process,
the water is being aerated, eliminating some of
the chlorine. If you choose to add water
conditioners, you may add them into the stream
of water as you are refilling the tank.
6. When the aquarium is filled, turn the switch
C
to
the CLOSED position (See Fig. 2) and remove the
gravel tube
D
from your tank.
7. Return to your sink and gently turn the bottom of
the pump
B
1/4 turn to the left and pull down to
DRAIN position (See Fig. 3).
8. Turn switch
C
to the OPEN position (See Fig. 4)
and coil up the tubing
E
(See Fig. 5 on front) from
aquarium to faucet. The unit should now be free of
standing water in the tubing.
9. Turn off the water and remove the “No Spill Clean
and Fill®” from your faucet.
10. Your “No Spill Clean and Fill®” is now ready to be
put away and your faucet’s original aerator and
washer may be put back onto your faucet.
Fig. 1 • PART A
69HD Brass
Adaptor
Fig. 2 • PART C
SWITCH IN
CLOSED POSITION
Fig. 3 • PART B
PUMP IN
DRAIN POSITION
Fig. 6 • PART B
PUMP IN
FILL POSITION
Fig. 4 • PART C
SWITCH IN
OPEN POSITION
Important!
To ensure a safe and
healthy water change,
do not remove more than
one third of the aquarium
or pond water. Ultimately,
we recommend doing
a 10% water change
twice monthly for the
healthiest aquarium
environment.
!
As
k your dealer about other quality
items available to enhance your
“No Spill Clean and Fill
®
”
Aquarium Maintenance System…
• Eco-Cleaning Cloth
• Universal Adaptor
• Brass Snap Connector
• Python Porter™
• Extended Length Gravel Tubes
• Professional Quality Air Line Tubing
• Algae Mitt™
• Pro-Clean™
• Python HOOK
• Python Water Treatments
Home of the
“NO SPILL CLEAN AND FILL
®
”
P.O. Box 48 • EastMeadow, NY 11554 USA
(414) 355-7000
www.pythonproducts.com
To Register Your Product, Scan QR Code
orVisit:http://www.pythonproducts.com/
registration.html
Warranty Coverage:
All Parts of the Python Products No Spill Clean N' Fill are covered under a one-year limited replacement warranty excluding damage from
misuse, abuse or modifications to the product as originally intended for use. For warranty consideration please email a picture of the broken
part along with proof of purchase, with your name and address, to support@pythonproducts.com or call 414 355-7000 for more information.
To Previous Page
Loading...