EasyManua.ls Logo

Q-See QC-SERIES - Auto Maintenance

Q-See QC-SERIES
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
PICTURE 4.5-9
AUTO MAINTENANCE
Just like your computer, the DVR can benefit from being restarted. This allows it to clear the memory and
other temporary files that may slow it down. None of your settings will be deleted.
Auto Reboot
•Selectthefrequency(dailyorweekly)thatyouwantthesystemtoreboot.
•Selectthetimeyouwantthereboottooccur.
•Therebootprocesswilltakeafewminutes.
NOTE! You should set the reboot
to take place on a date and time
when it won’t interrupt recording.
Auto Delete Old Files
•Thiswilldeleteoldrecordingsthathavenotbeenlockedtoclearroomontheharddrive.
•Usingthepulldown,youcanselectthatlesolderthanthenumberofdaysspecied(uptoolderthan
31 days) will be deleted.
CAUTION! Deleted recordings cannot be recovered!

Other manuals for Q-See QC-SERIES

Related product manuals