18
Step 4
QC View will open to the Login Screen. Enter the
default Username & Password below and click Login
to continue. These credentials are independent of
those used on the NVR.
Username: admin
Password: admin
NOTE: Adding the NVR to QC View has been elaborated
further on page 22 of this guide.
Windows, PC Users
Step 1
Go to www.q-see.com/support and search for answer
ID “2502” to download the latest QC View software.
Internet Explorer Users
Download QC View and click Run.
Chrome Users
In the Downloads bar at the bottom of the browser
window click QCView_Setup.exe to open the le.
To Next Page
Loading...