102 103
APPENDIX
On the Remote Client Computer
STEP 1. Minimum Requirement for the client computer:
- 2.8 GHZ processor or later
-512 MB RAM
- Windows 2000 (SP4 minimum), Win XP (SP2 minimum), Vista, Windows 7
- MOST AGP and PCI-E cards with 128MB of Video RAM and full Direct Draw support are
supported.
- DirectX 9.0 minimum
- 500 GB free space on HDD
STEP 2. Open up Internet Explorer.
If you are running XP with SP2 on Internet explorer, click ‘Tools - Internet Option - Security -
Custom Level’, and enable ‘Download unsigned ActiveX controls’.
STEP 3. In the IE textbox of the Internet explorer, input the router’s Public IP.
STEP 4. Select ‘Live Surveillance’ and click ‘OK’ on displayed page.
This will download the Webcam program. And then you can download Remote Playback
as well.
STEP 5. On Desktop now you should see ‘WebCam’ and ‘Remote Playback’ icon.
STEP 6. Open up Webcam, click ‘Key’ symbol icon.
Username: system (Password blank unless you setup a password on the main computer).
Server: this the IP address of the Main Computer.
Data port: 1159 and Command port: 1160.
STEP 7. Click ‘OK’. Now you should be able to view the live video from main computer.
STEP 8. To play back the Video that has been recorded in Main Computer, Select
‘Remote Playback’ on displayed page.
STEP 9. Click on ‘Config’.
Remote server: the IP address of main computer.
IP port: 1161.
STEP 10. Then click ‘OK’.
STEP 11. Click ‘Login’. Now you should be able to play back the recorded video from
Main Computer.
FUNCTION TREE
To Next Page
Loading...