Q-See QSDT4PCRC - 3.2 QSDT8 PCRS Card Hardware

14 15
CHAPTER 3 VIDEO CAPTURE CARD HARDWARE AND CONNECTIONS
Call
Monitor
Out
3.2 QSDT8PCRS CARD HARDWARE
PICTURE 3-6
PICTURE 3-7
Spot Out PortAlarm PortVideo- and Audio-In Dongles (2)
SPOT OUT
The Spot Out feature allows you to send selected video channels to a separate monitor.
Menus and controls will not display in this monitor. If you do not wish to use this feature then
you do not have to attach this port.
Spot Out with Multiple Cards
In situations where multiple cards are
installed, only one card can provide the signal
to the remote monitor.
Link the con2 to con1 ports on the cards,
with the last card linking to the Spot Out port
on the face plate.
PICTURE 3-8
PICTURE 3-9
VIDEO AND AUDIO PIN LAYOUT
Video and audio input is provided through the two dongles which attach to the two 15-pin
receivers on the card. Each dongle supports four channels of video and four channels of
audio.
P4 P3
Video 1 GND Video 2 GND Video 3 GND Video 4 GND
GND Audio 1 Audio 2 Audio 3 Audio 4 Null GND
PIN 1 2 3 4 5 6 7 8
PIN 9 10 11 12 13 14 15
Video 5 GND Video 6 GND Video 7 GND Video 8 GND
GND Audio 5 Audio 6 Audio 7 Audio 8 Null GND
PIN 1 2 3 4 5 6 7 8
PIN 9 10 11 12 13 14 15
P2 P1
Video 1 GND Video 2 GND Video 3 GND Video 4 GND
GND Audio 1 Audio 2 Audio 3 Audio 4 Null GND
PIN 1 2 3 4 5 6 7 8
PIN 9 10 11 12 13 14 15
Video 5 GND Video 6 GND Video 7 GND Video 8 GND
GND Audio 5 Audio 6 Audio 7 Audio 8 Null GND
PIN 1 2 3 4 5 6 7 8
PIN 9 10 11 12 13 14 15
P2 P1
Pin Connection
1 VIDEO-1
2 GND
3 VIDEO-2
4 GND
5 VIDEO-3
6 GND
7 VIDEO-4
8 GND
9 GND
10 AUDIO-1
11 AUDIO-2
12 AUDIO-3
13 AUDIO-4
14 NULL
15 GND
Pin Connection
1 VIDEO-5
2 GND
3 VIDEO-6
4 GND
5 VIDEO-7
6 GND
7 VIDEO-8
8 GND
9 GND
10 AUDIO-5
11 AUDIO-6
12 AUDIO-7
13 AUDIO-8
14 NULL
15 GND
P4
P3