Need help?Do you have a question about the Qcells Q.HOME CORE H4 and is the answer not in the manual?
General| Max. Output Power | 5 kW |
|---|---|
| Nominal Voltage | 51.2 V |
| Communication | CAN, RS485 |
| Depth of Discharge (DoD) | 90% |
| Efficiency | 95% |
| Weight | 120 kg |
| Cycle Life | 6000 cycles |
| Scalability | Up to 3 in parallel |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
Introduction to the installation and user manual for Q.HOME CORE H4/A4/H5/A5.
Identifies electricians and qualified technicians as the intended audience for installation.
Explains warning, caution, and note symbols used to convey safety and installation information.
Specifies Q.HOME CORE is for residential use, a single-phase grid-connected system with Li-Ion battery.
Details critical safety measures including qualified personnel, high voltages, and proper handling procedures.
Describes the inverter's behavior during an earth fault, including operation stop and buzzer activation.
Explains the neutral line relay of Q.HOME CORE remains closed regardless of protection status in Australia.
Illustrates and explains various safety labels such as eye protection, hot surface, and electric shock warnings.
Provides guidelines for the proper disposal of Q.VOLT and Q.SAVE products according to European directives.
Step-by-step guide on how to safely unpack the Q.HOME CORE product, including weight warnings.
Lists all items included in the Q.VOLT package, such as the inverter, mounting bracket, and cables.
Lists all items included in the Q.SAVE package, such as the battery, mounting bracket, and quick guide.
Details optional accessories available for the Q.HOME CORE system, including Wi-Fi dongles and energy meters.
Provides a detailed diagram of the Q.VOLT unit, identifying all external connectors and ports.
Shows a diagram of the Q.SAVE unit, illustrating its internal components and external ports.
Lists comprehensive technical specifications for the Q.HOME CORE system across different models.
Continues detailing product specifications, including battery unit specs, efficiency, and certifications.
Explains the MEN Link configuration for Australia, detailing the internal relay connections for off-grid mode.
Illustrates single-phase and three-phase TN-S and TT network system diagrams for H4/H5 models.
Details three-phase TN-S and TT network system diagrams for H4/H5 models, showing connections to grid and loads.
Illustrates single-phase TN-S and TT network system diagrams for A4/A5 models, including PV inverter and CT connections.
Details three-phase TN-S and TT network system diagrams for A4/A5 models, showing PV inverter and CT connections.
Specifies conditions for the installation site, including temperature, ventilation, and avoiding hazardous areas.
Details required clearances around the unit for effective heat dissipation and cabling access.
Provides precise dimensions and hole specifications for the mounting bracket used for installation.
Lists essential safety gear required for installation, such as insulated gloves, goggles, and safety shoes.
Lists all necessary tools for installing the Q.HOME CORE system, including screwdrivers, wrenches, and testers.
Step-by-step instructions for mounting the Q.HOME CORE unit securely onto a wall.
Provides instructions for installing the Q.HOME CORE unit on the floor using an optional stand.
Identifies and illustrates all external connectors and ports on the Q.SAVE and Q.VOLT units.
Details the required specifications, diameter, and color coding for power cables used in the system.
Specifies circuit breaker requirements, RCD considerations, and grounding procedures for the unit.
Instructions on how to open the front and wiring covers of the inverter and battery packs.
Illustrates cable stripping for grid/load wires and PE wire crimping process.
Step-by-step guide to connecting the load and grid cables, including preparing glands.
Details connecting L, N, PE wires, torque specifications, and securing cables into connectors.
Explains how to connect to the internet and details DRM specifications for grid interaction.
Provides instructions for assembling and connecting LAN or DRM cables using glands and RJ45 plugs.
Details the CT installation process for A4 and A5 models, including cable connections and CT placement.
Guides on connecting an energy meter via the RS-485 port, including wire preparation and terminal block connection.
Instructions on how to properly close and secure the wiring and front covers after installation.
Explains how to connect the BMS communication cables to enable communication with battery packs.
Details the assembly process for the battery DC cable connector, including wire stripping and insertion.
Provides step-by-step instructions for connecting the battery DC cables to the unit, aligning arrows and tightening nuts.
Guides on assembling the PV connector, including stripping cables, crimping, and engaging contacts.
Instructions for checking PV string polarity, open circuit voltage, and connecting DC cables to the Q.HOME CORE.
Details the installation and configuration settings for the EM24 three-phase energy meter.
Details the installation and configuration settings for the EM24 single-phase energy meter.
Details the installation and configuration settings for the EM112 single-phase energy meter, with a note on EM24 recommendation.
Step-by-step guide to powering on the Q.HOME CORE by activating AC breaker, PV switch, and battery DC switch.
Explains the meaning of different LED colors and behaviors for status indication.
Instructions on using the dark start button to power on the Q.HOME CORE when no PV or Grid is available.
Guides on connecting the Q.HOME CORE to the system using a Wi-Fi dongle or USB tethering.
Detailed steps for setting up the system using the Q.OMMAND GO mobile application.
Instructions for setting the region and time, and selecting the appropriate grid code for Australia.
Explains different energy policy modes like Standby, Self-consumption, Zero Export, and Time-based.
Steps to access advanced settings within the Q.OMMAND application for further configuration.
Details voltage protection and frequency-watt response parameters for system stability.
Explains Volt-Watt response curves and settings for fixed power factor control.
Covers Volt-Var response modes and limit control functions for inverter operation.
Details settings for fixed power, frequency-watt response, and power factor control.
Guides on how to check firmware version, region, and grid code settings in the Q.OMMAND app.
Step-by-step procedure for safely powering down the Q.HOME CORE system.
Instructions on how to lock the DC and PV switches with a padlock for safety after powering off.
Essential safety precautions and guidelines for performing maintenance on the battery system.
Information on how to register the product via the web or the Q.OMMAND Pro mobile application.
Lists common error codes and directs users to the Q.OMMAND app and service center for support.
To Next Page
