4
OPENING SIZE AND ANGLE MOUNTING
The Crystal® will fit inside openings from 29.5-40.5" (75-
103 cm)* and in front of openings 26.4-36.6" (67-93 cm).
The size of the gate is adjustable by sliding the two gate
panels, adjustments in handle and hinges.
*With addition of included Baseboard Spacers.
Besides the normal perpendicular mounting, the Crystal
gate can be mounted at any angle within 180 degrees.
This allows the gate to be mounted inside the opening,
in between odd
angled locations,
as well as in front
of openings. If
installed in front
of an opening
the gate will fit
openings up to
approximately
36.6" if mounting
surface is flat.
Minimum Maximum
To Next Page
Loading...