EasyManua.ls Logo

Qilive Q.1113 - Page 8

Qilive Q.1113
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
EN
4.9. USE MICROSD (TF) MODE
You can insert a microSD (TF) card into the microSD (TF) card slot on the top of the speaker and
play music stored on the card.
4.10. USE AUX MODE
You can connect a playback device to the speaker using the supplied Aux-in audio cable and use
the speaker as an external speaker.
4.11. USE MICROPHONES
You can connect up to two microphones to the speakers and use them at the same time.
1. Connect a microphone to either of the microphone jacks.
2. Turn on the microphone if it has a power switch.
3. Speak or sing into the microphone.
4.11.1. USE MICROPHONE PRIORITY MODE
To activate microphone priority mode, press and hold the LED mode button (
) for
3 seconds. The screen displays “on”.
To deactivate microphone priority mode, press and hold the LED mode button ( ) for
3 seconds. The screen displays “off”.
4.11.2. ADJUST VOLUME
The adjustable microphone volume levels are between H00 and H30. The adjustable echo volume
levels are between E00 and E30.
1. Press the Menu button (
) to view the current microphone or echo volume on the screen.
2. Press the Plus or Minus button ( or ) to adjust the microphone or echo volume.
4.12. RECORD SOUND
To use the speaker as a sound recorder, you must connect at least one microphone to the
speaker and connect or insert a USB ash drive or microSD (TF) card.
Press and hold the Next track / Start recording button (
) for 3 seconds to start recording
sound. Press and hold this button for 3 seconds again to stop recording sound.
Press and hold the Previous track / Play recording button ( ) for 3 seconds to start playing
the last recording.
4.13. USE THE LED LIGHT
To turn the LED light on or off, push the LED light switch towards ON or OFF.
To change the light effect, press the LED mode button ( ).
4.14. USE THE REMOTE CONTROL
You can use the supplied remote control to operate the speaker from a short distance. Before
using the remote control, correctly insert 2 new AAA batteries (not supplied) into it.
The remote control has the following buttons:
1. Mute button (
): Mute or unmute the speaker.
2. Mode button ( ): Set the speaker to work in USB, microSD (TF), AUX, FM or Bluetooth
mode.
3. Stop/Play recording button ( ): Short press to stop recording and play the recorded sound.
4. Play / Pause / Search button ( ): In USB, microSD (TF), AUX or Bluetooth mode, short
press to start, pause or resume playing music. In FM mode, long press to start searching for
and saving FM radio stations automatically.
5. Next track button ( ): Go to the next track in USB, microSD (TF), or Bluetooth mode. Adjust
the radio frequency in FM mode.
6. Volume down button ( ): Decrease the speaker volume.
7. LED mode button ( ): Change the LED light effect.

Table of Contents

Related product manuals