EN
11
3. Wipe the outside of the appliance with a soft dry cloth. Never
use solvents.
• Regularly check the door seals and wipe clean to ensure they
are free from debris.
• Dust off the back of the appliance regularly. This will improve the
performance of the appliance and save electricity consumption.
6.2 Defrosting
Due to seasonal changes, a thick layer of frost may form. To
defrost manually, unplug the appliance from the power supply,
then remove excess frost with a dry cloth.
Defrosting regularly helps to lower the energy consumption of the
appliance.
6.3 Lamp (optional)
This appliance contains a lamp (optional). In the event of a fault,
contact a qualied technician to inspect and/ or replace the lamp.
6.4 Transportation
Caution!
Do not place the appliance upside down or sideways.
During transportation, the appliance inclination must not
exceed 45°.
• Do not lift the appliance by holding the top edges of the appliance.
Hold the appliance by its base or sides.
• Before moving the appliance, remove all food and secure the
components properly.
• Tape the door to secure them.
• Tape the power cord to the side of the appliance to prevent
damage during transportation.
6.5 Storage
• If the appliance is not used for an extended period, unplug it
from the power supply, remove all food and clean the appliance.
• During storage, leave the door slightly open to prevent the
formation of unpleasant odours.
To Next Page
Loading...
Need help?
General
