5
iGS10 can be used with ANT+ sensor as below: heart rate monitor, cadence sensor, speed
sensor, cadence and speed combined sensor
Please search the ANT+ sensors When first time using ANT+ sensors.
Steps：
1) Wake up ANT+ sensors.
Heart rate monitor should be worn directly on skin just around the chest
Cadence sensor should be installed on the crank arm of no-drive side, then rotate the
crank arm
Speed sensor should be installed on the top of front wheel hub, then rotate the front
wheel
2) Hold right button more than 2 seconds to enter the setting mode.
3) Select right button to scroll setting mode from E1 to E4.
To Next Page
Loading...
Need help?
General
