SPECIAL NOTICE
Warning: this motorcycle is equipped with a main fuse that must meet the standard requirements
to run safely. DO NOT use fuses of incorrect specifications or other conductive objects; otherwise
it will lead to damage to parts, fire, and/or a serious accident.
Fuse location: under the rider's seat
A blown fuse is usually caused by an electrical system short. Before installing a replacement fuse, the
vehicle should be inspected to determine if there is a fault that can be corrected beforehand. If the fuse
continues to blow when replaced, you should immediately take your vehicle to an authorized service
center for repair. Vehicle operation may continue if the fuse does not blow after inspection and
replacement.
Precautions:
*When installing or replacing the battery for the first time, pay attention to distinguish between
positive and negative connections. If the battery connections are reversed, please check if the main fuse
is intact. However, if the fuse is intact or not, take the motorcycle to your maintenance center for
inspection to prevent damage to electrical components due to the reversed battery connection. If any
damaged components continue to work, they could lead to some unpredicatable faults;
* Before replacing the fuse, turn off the ignition switch to prevent accidental short circuits;
To Next Page
Loading...