This document provides a comprehensive guide for the battery replacement, setup, and user instructions for Qmotion UK advanced shading systems, specifically covering Roller Blinds and Roman Blinds. It also includes general information about the batteries used across various Qmotion products.
Function Description
Qmotion advanced shading systems are designed to provide automated control over window coverings, enhancing convenience and energy efficiency. The blinds operate on batteries, eliminating the need for hardwiring and simplifying installation. The system allows users to control the blinds' position, moving them to upper or lower limits, and maintaining settings even after battery replacement if performed within a specific timeframe.
Important Technical Specifications
The Qmotion shading systems utilize Alkaline D Cell batteries. The number of batteries required varies significantly depending on the product type and the width of the blind.
- Battery Type: Alkaline D Cell. The manual explicitly states that only long-life Alkaline D Cell batteries should be used, and rechargeable batteries are NOT recommended.
- Battery Quantity by Product and Width:
- Roller Blinds:
- 394mm – 559mm: 3 AA batteries
- 600mm – 625mm: 3 D batteries
- 630mm – 1067mm: 4 D batteries
- 756mm – 2438mm: 6 D batteries
- 883mm – 3658mm: 8 D batteries
- Roman Blinds:
- All widths (394mm – 3658mm): 4 D batteries
- Honeycomb Blinds:
- All widths (394mm – 3658mm): 4 D batteries
- Venetian Blinds:
- All widths (394mm – 3658mm): 4 D batteries
Usage Features
The Qmotion systems offer straightforward operation and control:
- Remote Control Operation: Blinds are controlled via a remote or other compatible controls to send them to desired positions, such as the upper limit.
- Limit Retention: If new batteries are installed within 30 minutes of removing the old ones, the blind will retain all its previous settings and limits, minimizing the need for reprogramming.
- Battery Status Indicators: The manual suggests that a visibly slower operation or a failure to respond to control signals ("Tug" commands) are signs that the batteries may need changing.
Maintenance Features
The primary maintenance task for Qmotion shading systems is battery replacement, which is detailed with step-by-step instructions for both Roller Blinds and Roman Blinds.
Battery Change Procedure for Roller Blinds:
- Preparation: Ensure a full set of new Alkaline D Cell batteries is ready.
- Fascia Removal: Carefully remove any fascia covering the blind.
- Accessing the Battery Tube: Pull the blind hem bar past its lower limit until the metal tube is visible.
- Stopping the Blind: Hold the hem bar or metal tube; the blind will attempt to return to its lower limit for a second before stopping, making the battery cover accessible.
- Battery Cover Removal: Remove the plastic battery cover by hand.
- Old Battery Removal: Remove the old batteries. The first battery may be tight due to a spring. Use a pointed object to slide the remaining batteries to the opening for removal.
- New Battery Installation: Install the new batteries, ensuring correct polarity. The last battery will be tight.
- Battery Cover Replacement: Replace the plastic battery cover, ensuring it is flush with the outer surface of the tube.
- Functionality Check: Send the blind to its upper position using the controls.
- Recycling: Recycle the old batteries responsibly.
Battery Change Procedure for Roman Blinds:
- Preparation: Ensure a full set of new Alkaline D Cell batteries is ready.
- Fabric Removal: Carefully remove the fabric from the Velcro on the front cover of the headrail.
- Headrail Cover Removal: Remove the front cover of the Head Rail. It is tight, so use a flat tool to prevent damage to the fabric.
- Motor and Battery Assembly Access: The motor and battery assembly will be visible on the right-hand side.
- Old Battery Removal: Remove the old batteries. The first battery may be tight due to a spring.
- New Battery Installation: Install the new batteries, ensuring correct polarity. The last battery will be tight.
- Headrail Cover Replacement: Replace the Head Rail cover, ensuring it is correctly seated and inline.
- Functionality Check: Send the blind to its upper position using the controls.
- Recycling: Recycle the old batteries responsibly.
- Importance of Alkaline D Cell: The document emphasizes the critical importance of using only new, good quality, long-life Alkaline D Cell batteries. It explicitly warns against using rechargeable batteries.
- Signs for Battery Change: Users should look for two key indicators that batteries need changing: the blind operating visibly slower than usual, or the blind failing to respond to control signals or "Tug" commands.
This guide ensures that users can effectively maintain their Qmotion shading systems, ensuring continuous and reliable operation.
Need help?
General
To Next Page