Qqest Software Systems,
Inc.
Using the IQ 300
Time Clock
3/24/2008
6 of 7
4
This option enables the key click. Enable this option if you want the clock
to beep every time a key is pre
ssed. Type in 1 to enable the option, and 0
to disable it.
5
This option enables relay events. Type in 1 to enable relay events, and 0
to disable them. This is a premium option, and requires a special
password. Press <CLR> to cancel, and <ENTER> to enter
your password
and access the option.
Note:
Option #5 and option #13 are mutually exclusive. It is not possible to
enable both options.
6
This option enables the <JOB> key. Type in 1 to enable the <JOB> key,
and 0 to disable it. This is a premium option, a
nd requires a special
password. Press <CLR> to cancel, and <ENTER> to enter your password
and access the option.
7
This option enables the <DEPT> key. Type in 1 to enable the <DEPT>
key, and 0 to disable it. This is a premium option, and requires a specia
l
password. Press <CLR> to cancel, and <ENTER> to enter your password
and access the option.
8
This option enables the <TIPS> key. Type in 1 to enable the <TIPS> key,
and 0 to disable it. This is a premium option, and requires a special
password. Press <C
LR> to cancel, and <ENTER> to enter your password
and access the option.
9
This option enables the <IN> and <OUT> keys that allow you to manually
determine whether a punch is an In or an Out punch.
10
This option allows you to select the displayed date f
ormat. Choose
between a US and European date format.
11
This option allows you to turn fingerprint verification on or off for all
employees.
12
This option allows you to select the baud rate at which the clock
communicates. The available selections are 9
600 and 38400 bps. This
option is only used when the clock is communicating with additional Daisy
time clocks. When using ETC Daisy clocks, a baud rate of 9600 bps is
used. Use a baud rate of 38400 bps for IQ 500 Daisy clocks.
13
This option allows you to
enable the Door Security feature. The time clock
relay is connected to an external door switch. When an employee¶s punch
at the time clock is accepted, the relay activates, and the door opens. This
is a premium option, and requires a special password.
Not
e:
Option #5 and option #13 are mutually exclusive. It is not possible to
enable both options.
14
This option is currently undefined. An option may be added here at a
future date.
15
This option enables the Quick Punch feature. With this feature enabled,
employees do not have to press the final <ENTER> when clocking In or
Out.
16
This option is used with the barcode and Proximity card readers. It
specifies whether the first or last 5 digits of the card number are to be
used.
To Next Page
Loading...