EasyManua.ls Logo

QSC DCM-1 - Page 33

QSC DCM-1
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
SPECIFICATIONS
Hearing Impaired Output
Output Stage Type Single-ended balanced impedance
Output Impedance 50 ohms
Nominal Output Level -11.8 dBu (200 mVrms)
Loading Requirements R
min
= 2k ohms, C
max
= 4 nanoFarads
Monitor Speaker
Driver 4.5-inch full-range
Amplifier 10 watt class AB
Frequency Response 70 hertz to 15 kilohertz (±2 dB)
Dynamic Processing 1.4:1 compression
Dimensions 19" (wide) x 5.25" (high) x 14" (deep)
Weight 17.3 pounds
Line Voltage 85 VAC - 260 VAC, 50/60 Hz
Fuse Littlefuse #218 001 or Bussman #S5504-1A (250 Volt, 1 Amp)
Safety Agency Approvals UL 6500, CSA
EMC Approvals FCC Class A
Connectors
AC Power- IEC style detachable cord receptacle
RS-232- 9-pin D-sub female receptacle
Cinema Processor Input- 25-pin D-sub female receptacle
DataPorts- DCM-1 Eight 15-pin D-sub HD female receptacles
DCM-2 Eleven 15-pin D-sub HD female receptacles
DCM-3 Fifteen 15-pin D-sub HD female receptacles
Surround EX Insert- 9 pin D-sub male receptacle
Surround EX Switching- screw terminal
Powered Subwoofer Out- screw terminals
Hearing Impaired Out- screw terminals
PC Communications Baud rate 19,200bps