27
TD-000472-00-B
TouchMix-16 Back Panel
Refer to — Figure 15
— Figure 15 —
Aux 2 Aux 1
Talkback
Main Right Aux 6 Aux 5Main Left Aux 4 Aux 3Power
USB
®
1.
USB 3.0, Type A
– For attaching USB storage devices
1
and Wi-Fi adapter.
2.
K & Lock® Security Slot
– Compatible with the MicroSaver Security Cable
3.
Power Supply
– Use the power supply delivered with the mixer, do not substitute.
4.
Talkback microphone
– Balanced female XLR
5.
Main Right and Left output
– Balanced male XLRs
6.
Auxiliary outputs 1 through 6
– Balanced male XLRs
TouchMix-8 Back Panel
Refer to — Figure 16
— Figure 16 —
®
Aux 3/4
Cue / Monitor
Right
Left
4 3 2 1
Power
Phones
USB
1.
USB 3.0, Type A
– For attaching USB storage devices
1
and Wi-Fi adapter.
2.
K & Lock® Security Slot
– Compatible with the MicroSaver Security Cable
3.
Power Supply
– Use the power supply delivered with the mixer, do not substitute.
4.
Cue / Monitor
– Stereo 1/4” TRS. Line or headphone output is directed to this output when a channel Cue is activated.
5.
Aux 3/4
– Stereo 1/4” TRS. Line or in-ear output. This output is wired in parallel with Aux 3 and 4 XLRs.
6.
Main Right and Left output
– Balanced male XLRs
7.
Auxiliary outputs 1 through 4
– Balanced male XLRs
1 Drives must be formatted using the FAT32 file system. For best results use 7200 RPM, USB 3 hard drives or high-speed SSD. Drive performance is critical for recording. For more
information and to see a list of qualified drives, visit qsc.com. At this time, the TouchMix does not support importing or re-importing digital audio files that have been created or edited
on another device.
To Next Page
Loading...
