43
TD-000472-00-B
Output Channel – Setup / Delay
Output Channel Setup provides control of various functions that apply specifically to a single output channel.
Home Select the
Aux Bank
Touch a
Select Button
Select
Setup Tab
Setup
Aux Outputs
Aux 1 Main
or
Refer to — Figure 37
1.
Setup Tab
– Selects the Setup screen
2.
Link Button
(For TouchMix-16, Aux Channels 1-6 only) (For TouchMix-8 Aux Channels
1-4 only) – Links adjacent channels. The odd numbered channel settings are copied
to the even numbered channel. Pan settings are mirrored. Only odd > even linking is
supported – even > odd linking is not.
3.
Channel Label
– The system name for the channel. This name does not change.
4.
Name Field
(For Aux Channels Only) – Touch the Name to display a keyboard that may
be used to enter a name for the channel.
5.
Delay In Button
– Engages or disengages the Delay.
6.
Delay Knob
– Sets the output delay. Readouts are provided in milliseconds, feet, and
meters.
7.
GXD Amp Settings Button
– Click this button to determine the best settings for your
QSC GXD amplifier. Refer to Output Channel – QSC GXD Amplifier Settings on page
45 for details.
8.
Speaker Settings Button
– Click this button to determine the best settings for your QSC K Series, KW Series, and KLA Series Loudspeakers. Refer
to Output Channel – Speaker Settings on page 44 for details.
9.
Aux Pick-Off Switch
– This setting is for all Aux Sends to the selected Aux Output Channel. Determines where the aux signal is taken. The
selections are: Pre Fdr/ Post Fdr / Pre Dyn / Pre All. Pre Fdr is most commonly used for monitors.
10.
Mute Group Assignment Buttons
– Select the Mute Groups this channel is to be part of. User-assigned names display on the buttons. See the
Mute Groups topic.
11.
DCA Group Assignment Buttons
– Select the DCA Groups this channel is to be part of. User-assigned names display on the buttons. See the
DCA Groups topic.
— Figure 37 —
To Next Page
Loading...
