Pit stop
A unicycle is a comparatively simple machine, requiring
only minimal maintenance. The wheel and pedals need
to bear the greatest stress. After a few days you should
ensure the spokes are tensioned correctly and the wheel
is trued. A cycle shop can do this for you.
The pedals and
crank-arms are
handed; they are
labelled “R” and “L”
for the right-hand side
and left-hand side, respec-
tively. When fitting the left-hand
components, be aware that they are
counter-threaded and so must be turned in
the opposite direction (counter-clockwise to
tighten) to the right-hand components (clock-
wise).
On the next pages, you will find general information
about unicycle components. QU-AX manufactures all
parts needed for repairs or aftermarket upgrades. If any
components become damaged, your unicycle dealer will
have spares.
Toolbox
The QU-AX toolbox is specifically designed for unicy-
clists to ensure you always have the right tools for every
part of your unicycle!
- colour-indexed allen keys
- heavy duty tyre levers
- spoke key
- QU-AX ratchet (e.g. for bearing-cup bolts)
- high-end pipe-cutter for seatposts
- heavy duty 15mm pedal wrench
- professional QU-AX bearing extractor
- bearing assembly-tool
- crank-extractor
- Q-Axle-adjusting-tool
This toolbox allows you to
completely strip and reassemble
your unicycle.
16 17
To Next Page
Loading...