Qu-bit Mixology User Manual

4
Installation
To install, locate 28 HP of space in your Eurorack case and confirm the positive 12
volts and negative 12 volts sides of the power distribution lines. Plug the connector
into the power distribution board of your case, keeping in mind that the red band
corresponds to negative 12 volts. In most systems, the negative 12 volt supply line is
at the bottom.
The power cable should be connected to the Mixology with the red band facing the
bottom of the module.
Specifications
Format: 28 HP Eurorack module
Depth: 23mm (Skiff Friendly)
Max Current: +12V = 174mA
-12V = 55mA

Qu-bit Mixology Specifications

General

Brand	Qu-bit
Model	Mixology
Category	Mixer
Language	English