Quackenbush 158QRA Series

Need help?

Do you have a question about the Quackenbush 158QRA Series and is the answer not in the manual?

Summary

Model Nomenclature

Series, Brand, Style, and Revision

Defines tool series, brand, style, and revision codes.

Speed, Feed Rate, and Spindle Specifications

Details spindle speed, feed rate, spindle length, and interface threads.

General Information and Safety

General Safety Instructions

Essential safety guidelines for tool operation and maintenance.

Personal Protective Equipment (PPE)

Mandates eye protection and recommends hearing protection.

Tool Operation and Safety

Spindle Safety and Guards

Warns about spindle retraction speed and use of spindle guards.

Operation Procedures and Gear Stop Adjustment

Details tool operation, feed mechanism engagement, and gear stop adjustment.

Service and Maintenance Procedures

Disassembly and Gearing Service

Guides on disassembling gears, planet cage, and motor modules.

Motor Module Assembly and Rotor Blades

Details motor assembly steps and rotor blade replacement.

Drill Head Service

158 Drill Head Disassembly & Assembly

Step-by-step guide for disassembling and assembling the 158 drill head.

Gear Stop Adjustment Methods

Explains two methods for adjusting the gear stop on the 158 drill head.

158-15 Drill Head Disassembly

Instructions for disassembling the 158-15 drill head.

158-15 Drill Head Assembly

Assembly Procedures and Notes

Details assembly steps and critical notes for the 158-15 drill head.

Handle and Sensor Assemblies

Illustration A Component Breakdown

Handle and Sensor Parts List

Illustration A Part Details

Motor Module Assembly

Illustration B Component Breakdown

Motor Module Parts List

Illustration B Part Details

Gearing Assembly

Illustration C Component Breakdown

Gearing Assembly Parts List

Illustration C Part Details

158 Drill Head Housing Assembly

Illustration D Component Breakdown

158 Drill Head Housing Parts and Assemblies

Illustration D Part Details

Drill Head Assemblies and Guards

158 Drill Head Gearing Assembly

Illustration E Component Breakdown

158 Drill Head Gearing Parts and Specs

Illustration E Part Details

Gear and Spindle Specifications

158 Drill Head Component Data

158;15 Drill Head Housing Assembly

Illustration F Component Breakdown

158;15 Drill Head Housing Parts and Assemblies

Illustration F Part Details

158;15 Drill Head Assemblies and Guards

158;15 Drill Head Gearing Assembly

Illustration G Component Breakdown

158;15 Drill Head Gearing Parts and Data

Illustration G Part Details

158;15 Drill Head Component Data

Drill Head Assembly Specifications

Gear and Spindle Data Tables