quadient iX-3 Series User Manual

Moistener12.2
Moistener Overview
A Sealing Moistener:
• Is used to moisten the glue on the envelope and seal the flap closed.
• Consists of the brush assembly, sponge assembly, and water reservoir
• All of which are used to moisten the glue on the envelope flaps.
• Uses an envelope flap separation blade to open the envelope flap slightly.
Sealing Moistener Maintenance:
• Keep fresh water in the water reservoir.
• Clean the Brush Assembly weekly with fresh water.
• Rinse out the sponge with fresh water weekly.
• Replace the brush assembly when the moistener is not moistening properly.
• Replace the sponge when it begins to break down and not soak up water properly.
Hand-Feed Table Moistener
Hand-Feed Table Moistener
236
| Page 236 | Apr-28-2023 03:14 |
12
Maintenance

quadient iX-3 Series Specifications

General

Envelope Feeding	Automatic
Label Dispenser	Optional
Print Technology	Inkjet
Connectivity	USB
Display	Touchscreen
Technology	Inkjet
Media Types	Envelopes, labels
Power Supply	100-240V, 50/60 Hz
Processing Speed	Up to 15, 000 letters per hour
Weighing Platform	Integrated weighing platform available