How to set the ePostage connection
To set the ePostage connection:
1. As supervisor (see How to Log in as Supervisor on page 269):
Press and select the path: Maintenance Network Advanced Settings
ePostage Link
The ePostage Advanced Settings screen is displayed.
2. Enter PC IP address.
3. Enter PC Port number.
4. Press [OK] to validate.
How to Set Dynamic Scale High Accuracy Mode
Follow the steps below to set Dynamic Scale High Accuracy Mode.
To activate the high accuracy setting:
10
Configuring your Mailing System
293
| Page 293 | Apr-15-2022 12:02 |
To Next Page
Loading...
Need help?
General
