1. This product is precise equipment that integrates mechanics and electronics with expertise in aerodynamics and
high-frequency transmitting. It is required for the quadcopter to be correctly assembled and debugged to prevent an
accident to occur. The owner of this product should control the quadcopter safely and carefully. Please keep in mind we are
not responsible for this product being used improperly. This may result in severe injury or loss of property and we can not
control the operating process once the user assembles or uses this product.
2. This product is suitable for ages 14 years and up and people who have operating experience in flying a model.
3. Please fly quadcopter in open areas such as a local field and areas that allow remote control flying.
4. Once you are the owner of this product, you are responsible for your actions.
5. If there are any problems while using this product, such as operating or repairing, please reach our sales agent for
details. The sales agent will provide you with the technical support and after-sale service.
1. Install batteries with correct polarity.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries.
All the spare parts below can be bought from a local distributor.
1. The quadcopter battery power is low or dead.
2. The Transmitter battery is low or dead.
3. The transmitter band does not correspond to the decoding
of the quadcopter.
1. Insufficient power with the transmitter.
2. Transmitter with the same frequency is being used
nearby.
1. Charge the quadcopter.
2. Charge or replace the batteries if required.
3. Adjust the band on the transmitter and keep it the
same as the quadcopter.
1. Replace the battery.
2. Use the quadcopter out of the range of other RC
quadcopters.
To Next Page
Loading...
