Check that the frame and fork are not bent or broken.
If either frame or fork are bent or broken, they should be replaced.
Check that the folding joints are not bent or broken.
Check that the seat is adjusted properly, and seat post clamp is securely tightened.
9. Motor Drive Assembly and
Throttle
Ensure hub motor is spinning smoothly and motor bearings are in good working order.
Ensure all power cables running to hub motor are secured and undamaged.
Make sure the hub motor axle bolts are secured and all torque arm and torque washers are in
place.
Ensure battery is charged before use.
Ensure there is no damage to battery.
Lock battery to frame and ensure that it is secured.
Charge and store bike and battery in a dry location, between 50 °F – 77 °F (10 °C – 25 °C). Let
bike dry completely before using again.
Look over connectors to make sure they are fully seated and free from debris or moisture.
Check cables and cable housing for obvious signs of damage.
Ensure headlight, taillight, and brake light are functioning, adjusted properly, and
unobstructed.
Ensure all reflectors are properly fitted and not obscured.
Ensure all other fittings on bike are properly secured and functioning.
Inspect helmet and other safety gear for signs of damage.
Ensure rider is wearing a helmet and other required riding safety gear.
Ensure the mounting hardware is properly secured if fitted with a front rack, rear rack, basket,
etc. Ensure the taillight and taillight power wire are properly secured if fitted with rear rack.
Ensure fender mounting hardware is properly secured if fitted with fenders.
Ensure there are no cracks or holes in fenders if fitted with fenders.
Your cables, spokes, and chain will stretch after an initial break-in period of 50-100 mi (80-160 km), and bolted connections can
loosen. Always have a certified, reputable bike mechanic perform a tune-up on your Quali-bike after your initial break-in period
of 50-100 mi (80-160 km) (depending on riding conditions such as total weight, riding characteristics, and terrain). Regular
inspections and tune-ups are particularly important for ensuring that your bike remains safe and fun to ride.
17
To Next Page